Aquajet
Aquajet is one of the fastest, safest, and most reliable way to add water to your batteries!
Most industrial batteries need to be filled up with water regularly. Filling with manual methods, watering guns or float systems can take a significant amount of time. When
filling a large number of batteries the total amount of time results in huge maintenance costs. When batteries are filled by service engineers, rapid filling allows them to visit more sites in less time.
Aquajet is a single point filling system that fills each cell to the required level. A battery can be filled with precise level control in less than 15 seconds. When the tip of the injector touches the electrolyte, the internal valve shuts off with an action 20 times stronger than a float valve.
Aquajet eliminates the need for automation as batteries can be filled in almost the same amount of time that it takes to connect it. Each injector has it's own level-sensor enclosed in a protective housing. The sensor is powered by the water pressure and no moving parts are in contact with the electrolyte. There are no floats or delicate exposed parts to
stick or break, and they are not affected by oil, tar or abusive conditions. Rapid parallel filling is made possible by the unique low-friction tubing and pressurised water supply.
Using an approved water supply ensures a reliable performance. Filling batteries on large sites can be time-consuming.
Aquajet is the fastest method of precisely filling batteries and will significantly reduce labour costs. The rapid filling is also essential for service engineers who need to
visit several sites, or have limited opportunity to access batteries
AquaJet Cart
Technical Specification
RUGGED DESIGN. Heavy-duty powder coated steel
frame. 200mm steel ball bearing wheels mounted on integral welded steel axle. Tank fabricated from impact resistant MDPE. Industrial submersible pump protected by central mounting within the tank. Electrical components protected in water resistant enclosure.
FEATURES. Operating instructions located on back of unit. 200mm opening for filling tank. 3 metre power cord for connection to mains socket. 3 metres reinforced output hose. Flow indicator, water control valve and quick connect attached to end of hose.
SAFETY. 70mm water resistant power switch with neon indicator. Thermal pump protection circuitry. Optional dual voltage 110/230V model available with RCBO safety breaker.
SIMPLE. Fill tank with deionised water. Plug into mains electrical supply. Switch on pump. Quick connect to the Aquajet system on the battery and open the "Instant Valve". When the flow indicator stops spinning, filling is complete.
ELECTRICAL
Operating Voltage: 110/230 V (auto configuration)*
Current Consumption : 9.4 A
Nominal Power
Consumption: 900 W
* Auto Configuration feature must be used in conjunction with Philadelphia Scientific Genuine Power Cords. Any other cords may result in damage or incorrect operation.
GENERAL
Capacity 80 Litres (17.5 imp. Gallons)
Minimum Pressure 15 psi (1 bar)
Maximum Pressure 35 psi (2.4 bar)
Max. Flow 60 Litres per min. (13 imp. Gallons per min.)
Output Hose Length 3 Metres
INDICATIONS
Neon Indicator on top of
Switch Pump Running
Spinning Vane Revolves Filling
CONTROLS
Pump ON/OFF Water resistant Switch
Water ON/OFF Rotary Valve at end of
Dimensions
